Your IP has been blocked. Please perform the action below to regain access.
75.126.130.58-
Customer Reviews
Average Rating:
-
PEERLESS UNIVERSAL WALL MOUNT#ST635
EXTREMELY WELL MADE.WILL NOT HAVE TO BUY ANYTHING ELSE.INCLUDES ALL KINDS OF HARDWARE.MAY HAVE TO USE SPANNER BOARD IF MOUNTING EXACTLY BETWEEN 16"WALL STUDS FOR ATTACHING BACKING PLATE.OTHER THAN THIS.A++++.
Rating: -
very easy
if you've got the basic tools like a drill and a leveler this thing is a cinch to install. took only an hour or so for me and my dad to set up. this thing is sturdy!i don't have to worry that my new beautiful 32 inch Samsung will come crashing down. at this price, its a great buy
Rating: 
-
Great Design--But Be Sure it'll work for your Wall type
This mount is superbly designed and priced right, but just know that this size model for smaller TVs will not span the length between two wall studs 16" apart (the standard spacing for most sheetrock walls). A1 Books does not take returns on these racks so, you'll be stuck with it...as I am.
Rating: -
Flat screen mount
Worked great, easy to install and affordable. Connected it to my 32 inch Sony Bravia.
Rating: -
Right for the Price
I bought this to hang my 37 Toshiba LCD. Of course the holes did not line up with a stud in my wall and so I purchased some heavy duty toggle bolts from the hardware store and this did the job. Given I bought a TV that was at the higher range of support for this model I did not have much wiggle room when it came to sliding the TV left or right in order to center, so I had to center the mount where I wanted it on the wall, thus missing all available studs. I am happy with the mount, especially given the prices compared to others I have seen in retail stores. The tilt feature is sufficient for a normal size room, but if you are putting this up higher then say 10 ft or so, then you may want to look at a different model. I have my mount about 6.5ft off the floor and tilted completely forward. Sitting in my recliner about 10-12 ft away, the angle is perfect. If I would have bought the non-tilt model for 20 bucks less it probably would have worked just as well.
